Note also that the main 24-pin power connector (§ 4.2.1) is specified as "Molex* Housing: 24 Pin Molex Mini-Fit Jr.
1 Pair of 15 Circuit Molex 0.062' Male and Female Connectors With Pins. Molex 36 Position Crimp Housing Receptacle 03-06-1361. Molex Mini Fit Jr 18-24awg Female Crimp Terminal for ATX EPS and PCIE Connect. Note that AMP and Molex are two different manufacturers, and those are just part numbers. 1 Pair of 36 Circuit Molex 0.062' Male and Female Connectors With Pins. The ATX power supply specification actually refers (§ 4.2.2) to them as a " peripheral connector", specified as "AMP* 1-480424-0 or Molex* 15-24-4048 or equivalent". Your first pictured connector is actually a PATA/IDE ribbon data cable. Despite the different names, they are the same thing. Therefore, a power connector referred to as a "PATA" or "IDE" power connector is likely to be a "Molex 4-pin power connector" or "peripheral power connector" and looks like your latter pictures. The original ATX standard connector used for powering the motherboard was a single 20-pin Molex that has all the required +12VDC and +5VDC voltages with huge. The large one on the right is used for disk, CD-ROM and DVD.
#Computer power supply molex connector Pc#
It was most commonly used with pre-SATA hard drives, which are nowadays referred to as PATA (previously called IDE) drives. Power Supply Connectors These Molex connectors bring DC power to the drives inside a PC case.
The 4-pin power connector that is commonly called a "Molex connector" is really more a general purpose peripheral power connector that delivers 12 V and 5 V power. Including the main 24-pin ATX motherboard power connector! And companies other than Molex also make the connector you know as a "Molex connector", notably AMP but also many unbranded/generic ones are also available. "Molex connector" is actually a rather imprecise term, since the Molex company makes many, many different connectors.
0 kommentar(er)
